RS28H-USB Foot Switch with 3 pedals
Firmware & Downloads
2021-07-13
2021-07-13
Product Documents
Technical Specifications
Recommended Application Area
Application
- Transcription
Control Buttons
Number of buttons:
- 3
Lockable button(s):
- No
Software configurable buttons
- Applied
Nonslip mat:
- Equipped
Operation Modes
Olympus Mode
- Available (default)
HID keyboard Mode
- Available (optional)
Possible Pedal behaviour in HID Keyborad Mode
Single
- Triggers defined keyboard command on single click once.
Double
- Triggers defined keyboard command once on both press and release. Perfect for toggle functions like Play/Pause.
Long
- Triggers defined keyboard command continuously until pedal is released. (like a regular keyboard)
Dimensions / Weight
Cable length
- 1.8m
Weight
- 550g
Height
- 33.5mm
Width
- 190mm
Depth
- 120mm
Exterior
Available Colours
- Dark Grey
Connections
USB port
- 1.0/ 1.1/ 2.0/ 3.0/ 3.1 (Type A)
8 Pin jack
- Equipped (mini DIN)
Environment
Temperature
- 0 ‑ 42°C (operation)
Compatible Software
ODMS
- Version 6 (or higher)
DSS Player Pro
- Version 5.0 (or higher)
DSS Player for Mac
- Version 7 (or higher)
Olympus Sonority
- Version 1.0.1 (or higher)
Footswitch Configuration Tool
- Applied
Third party software
- Must support control via keyboard commands.
Foot Switch Configuration Tool – Basic Features
Configuration of HID keyboard commands / shortcuts
- Applied
Supported Multimedia keys (Windows)
- Scan Next Track
- Scan Previous Track
- Stop
- Play/Pause
- Mute
- Increase volume
- Decrease volume
- Launch Media Player
- Launch standard email client
- Launch calculator
- Launch standard internet browser
- Search
- Home internet browser
- Back
- Forward
- Refresh
- Favorites
Supported Multimedia keys (Mac OS)
- Scan Next Track
- Scan Previous Track
- Eject
- Mute
- Increase volume
Switching between Olympus Mode and HID keyboard mode
- Available
Templates for foot switch settings
- Save & Load
Admin Write Mode
Applied
Operating Systems & Requirements
Windows
- Operating system: Windows Vista/7/8/8.1/10
Macintosh
- Operating system: Mac OS X 10.9 ‑ 10.15
Compatible Olympus Hardware
Note
Note: The voice recorder must be placed in its docking station to be remote controlled with a foot switch or hand controller. Find below the necessary combinations.
CR20
- DS-F1 (VoiSquare)
CR15
- DS-7000
- DS-3500
CR10
- DS-5500
- DS-5000 / 5000ID
- DS-3400
CR3A
- DS-4000
- DS-3300
Knowledge Base & FAQ
This article will document how to use the foot switch configuration tool The Foot Switch Configuration Tool is used to customize the settings for the RS-28H and RS-31H models. Any combination of keyboard command can be assigned to each pedal, allowing the control of applications through hotkey shortcuts. You can also create setting templates for […]
This article will detail how to change foot switch settings in Transcription Module. ODMS R7 ODMS R6 SR2 ODMS R7 Customising foot switch Plug in the foot switch into the PC and open the ODMS Transcription Module software. You can check to see if the foot switch is recognised in the software by an icon […]
This article will document how you can lock pedals on a RS-31(H) Foot Switch. Lockable Pedals on RS-31(H) Foot Switch You are able to lock either the top or the centre pedal on an RS-31(H) foot switch. On the back of the foot switch there is a lock. Slide up to lock the top pedal […]
If you are experiencing an issue where you can’t operate any of the pedals on the foot control then please follow the steps below. Please note if you meant that the play button is greyed out, which is stopping you from pressing play on the foot control then please follow the Play button Greyed Out […]
Hands free recording can be useful so you are able to record without the need to operate your OM SYSTEM/Olympus Digital Voice Recorder. By using a docking station and a foot pedal this will allow you to free at least one hand and improve productivity. ODMS R8/R7 ODMS R6 ODMS R8/R7 The hands-free recording settings […]
Support & Repair
TECHNICAL SUPPORT
Use the link below to open a new support ticket for your product.
REPAIR SERVICE
Use the link below to start a repair service request for your product.